Casablanca Fan Co. has updated the electronics
in the Inteli-Touch to level 5, the New RMM V has been
the replacement board in product since December 2000.
The NEW RMM V will be used as the replacement for all
levels of RMM PC boards, such as the RMM II, RMM III
and RMM IV.
When replacing RMM Boards you will need to match
the electronics with the motor or PC Board that is being
replaced. This Technical Bulletin will help in the identification
of the motor run capacitors on the different PC boards.
Because of the different motors Casablanca has used
over the years, it's very important that you match the
correct PC board with the right motor. By using the
wrong board, the run capacitor on the board will make
the motor run hot. At the time you are replacing a motor
or PC board you must look at the run capacitors and
match the values, either being 9mfd, 10mfd or 11mfd.
The following information will help you locate and identify
motor run capacitors on the different PC boards. run
capacitors on the different PC boards.
NOTE: As for the Control W-32
OR W-33 MUST be use with the NEW RMM V PC Board.